For AI assistants: this page as plain markdown is at https://docs.voicelogica.ai/raw/phone-systems/avaya.md, and https://docs.voicelogica.ai/llms.txt lists the docs by topic, one file each, small enough to read whole. Read those rather than this HTML page.
Avaya IP Office
How Voice Logica connects
Section titled “How Voice Logica connects”IP Office registers a SIP Line to Voice Logica (way 1). Voice Logica creates the trunk and gives you a server, a username and a password.
- Calls IP Office sends out on this line group are answered by the AI agent.
- The agent transfers callers back over the same line; an Incoming Call Route rings the extension.
Before you start
Section titled “Before you start”- SIP Trunk Channels licences for the simultaneous calls (License → SIP Trunk Channels). A Warm transfer uses two until it connects.
- Manager at the same version as the IP Office software.
1. Create the connection in Voice Logica
Section titled “1. Create the connection in Voice Logica”Telephony - Trunks - Connect your PBX, pick Avaya IP Office and the agent. Keep the dialog open until it says Connected.
2. Add the SIP Line in Manager
Section titled “2. Add the SIP Line in Manager”- Right-click Line → New → SIP Line. Note its Line Group ID.
- SIP Line tab: ITSP Domain Name = the server.
- Transport tab: ITSP Proxy Address = the server, Layer 4 Protocol UDP, Send Port 5060.
- SIP Credentials: add User name and Authentication Name = the username, Password = the password, Expiry 60 minutes, Registration required ticked.
- VoIP tab: Codec Selection G.711 A-law first; DTMF Support = RFC2833.
- Merge and save the configuration.
3. Send calls to the agent
Section titled “3. Send calls to the agent”A short code or ARS entry that dials out on this Line Group ID. Point an auto-attendant option, a hunt group overflow or an after-hours route at it.
4. Let the agent transfer back to extensions
Section titled “4. Let the agent transfer back to extensions”An Incoming Call Route for this Line Group ID, with the extensions as destination (or by incoming number). Then, in Voice Logica, add the extensions as transfer destinations: an External destination with the extension number, or a User with that extension. Use Warm transfer.
5. Check it works
Section titled “5. Check it works”- The dialog says Connected; System Status → Trunks on IP Office shows the line in service.
- Dial the short code from an extension: the call appears in Calls.
Frequently asked questions
Section titled “Frequently asked questions”How do I connect my Avaya IP Office to Voice Logica?
IP Office registers a SIP Line to Voice Logica. In Voice Logica, open Telephony - Trunks - Connect your PBX and pick Avaya IP Office and the agent to get a server, a username and a password. In Manager, right-click Line → New → SIP Line, enter the server as ITSP Domain Name and ITSP Proxy Address (UDP, port 5060), add the username and password under SIP Credentials with Registration required ticked, then merge and save.
What licences does Avaya IP Office need for Voice Logica?
IP Office needs SIP Trunk Channels licences for the simultaneous calls with the agent (License → SIP Trunk Channels). Each call with the agent uses one channel, and a Warm transfer uses two until it connects. Manager must also be at the same version as the IP Office software.
How do I send Avaya IP Office calls to the AI agent?
Create a short code or ARS entry that dials out on the Line Group ID of the Voice Logica SIP Line. Then point an auto-attendant option, a hunt group overflow or an after-hours route at it.
Can the AI agent transfer a call back to an Avaya IP Office extension?
Yes. Create an Incoming Call Route for the Voice Logica Line Group ID with the extensions as destination (or by incoming number). In Voice Logica, add the extensions as transfer destinations (an External destination with the extension number, or a User with that extension) and use Warm transfer. If nobody answers in time, the agent comes back to the caller and takes a message.
How do I check that my Avaya IP Office is connected to Voice Logica?
The Connect your PBX dialog in Voice Logica says Connected, and on IP Office System Status → Trunks shows the SIP Line in service. Dial the short code from an extension: the call appears in Calls in Voice Logica.
