For AI assistants: this page as plain markdown is at https://docs.voicelogica.ai/raw/telephony/carriers.md, and https://docs.voicelogica.ai/llms.txt lists the docs by topic, one file each, small enough to read whole. Read those rather than this HTML page.
Carrier settings
Settings for the carriers our customers connect most often, taken from trunks that work in production. For the steps to add a trunk, see Your own carrier. For an office phone system (Panasonic, Grandstream, Yeastar, 3CX, FreePBX, Issabel, Alcatel, Avaya), see Connect your PBX.
In Telephony → Add Trunk, pick the carrier: the app fills in the host, port and transport below. You add the username, password and numbers.
Yuboto
Section titled “Yuboto”MyVoIP SIP trunk
| Field | Value |
|---|---|
| Host | sip.yuboto-telephony.gr |
| Port / transport | 5060, UDP |
| Registration | on, expiry 300 |
| Username / password | from MyVoIP → Devices |
Some accounts get their own endpoint instead of the shared host. MyVoIP → Devices shows it.
Yuboto cloud PBX (vPBX) extension
When the agent should be an extension of a Yuboto cloud PBX, connect it as an extension of that PBX:
| Field | Value |
|---|---|
| Host | your PBX’s address, <name>.vpbx2.yuboto.com |
| Port / transport | 5060, UDP. Change them only if your PBX shows other values for that extension |
| Username / password | the extension’s |
If the trunk gets no reply, check the port and transport your PBX shows for the extension: some use another port (up to 5086) or TCP.
Modulus
Section titled “Modulus”| Field | Value |
|---|---|
| Host | voips.modulus.gr |
| Port / transport | 5060, UDP |
| Registration | on, expiry 300 |
| Username | the Auth ID Modulus gives you, not the SIP username |
- Add every number to the trunk. Modulus sends the calls of all its customers from the same address, so we route each call by the number dialled. A call to a number that is not on any trunk is rejected rather than risk reaching another company.
Supervoice
Section titled “Supervoice”| Field | Value |
|---|---|
| Host | sip.supervoice.eu |
| Port / transport | 5061, TLS |
| Registration | on, expiry 300 |
If Supervoice gives you an outbound proxy, add it under Advanced on the trunk.
Inter Telecom
Section titled “Inter Telecom”| Field | Value |
|---|---|
| Host | sip.intertelecom.gr, or the address Inter Telecom gives you for your account |
| Port / transport | 5060, UDP |
| Registration | on, expiry 300 |
Confirm the exact host with Inter Telecom (+30 2170007000); some accounts get their own.
Telnyx
Section titled “Telnyx”| Field | Value |
|---|---|
| Host | sip.telnyx.com (sip.telnyx.eu for the EU region) |
| Port / transport | 5060, UDP |
| Registration | on |
| Username | the SIP Connection’s Auth ID |
Telnyx keeps one registration per credentials-based SIP Connection. If the same credentials are also on a softphone, desk phone or another platform, the trunk keeps dropping with 401. Details in Your own carrier → Telnyx.
Twilio
Section titled “Twilio”| Field | Value |
|---|---|
| Host | your Elastic SIP Trunk’s Termination SIP URI (<name>.pstn.twilio.com) |
| Port / transport | 5060, UDP |
| Authentication | by IP, both directions. No registration |
In Twilio, add the Voice Logica IP addresses to the trunk’s IP Access Control List (Support gives you the current list), and point its Origination at your company’s SIP address (Telephony → Call settings).
| Field | Value |
|---|---|
| Host | phone.plivo.com |
| Port / transport | 5060, UDP |
| Incoming calls | by IP: add Plivo’s inbound IPs for your region under Advanced → Authentication |
Cosmote, Vodafone and Nova
Section titled “Cosmote, Vodafone and Nova”- Business SIP trunk: Cosmote and Vodafone authenticate by IP. Ask your account manager for their signalling IPs and add them under Advanced → Authentication.
- A landline on the internet router: see Cosmote, Vodafone and Nova. Vodafone needs host
62.38.86.150, expiry 3600 (300 is rejected) and the edge device, because it accepts registrations only from inside its network.
Troubleshooting
Section titled “Troubleshooting”Why do my trunk's SIP logs show no reply from the carrier?
The host, port or transport is wrong; for a Yuboto vPBX extension, check the port and transport the PBX shows for it (5060, UDP unless it shows otherwise). Or the carrier accepts registrations only from inside its own network (Cosmote, Vodafone): in that case use the edge device.
Why does my carrier answer 401 or 403 when my SIP trunk registers?
If you get 401 again and again from the start, the username or password is wrong; for Modulus and Telnyx the username is the Auth ID. If the trunk registered earlier and now gets 401, the same account is also registered somewhere else: see Registration works, then keeps getting rejected.
Why do some calls from my Modulus trunk never reach the agent?
The dialled number is not on the trunk. Calls from Modulus are matched by number, so a number missing from the trunk is rejected. Add it under the trunk’s numbers.
Why did I get a Registration paused email about my SIP trunk?
The carrier rejected the trunk’s registration several times, so we paused it and keep retrying on our own (after 5 minutes, then longer) to keep the carrier from blocking the account. The email shows the likely cause. A successful registration recovers the trunk without any action from you.
