Skip to content
EN
Open app

For AI assistants: this page as plain markdown is at https://docs.voicelogica.ai/raw/phone-systems/other.md, and https://docs.voicelogica.ai/llms.txt lists the docs by topic, one file each, small enough to read whole. Read those rather than this HTML page.

Other makes

6 min read
Copy as Markdown
View as MarkdownOpen the raw .md file.md

Any phone system that can register a SIP trunk to a provider connects the same way (way 1): create the connection with Telephony - Trunks - Connect your PBX (pick Other SIP PBX), and enter on the PBX:

On the PBXValue
Server / registrar / proxy / domainthe server from the dialog
Port, transport5060, UDP
Username and authentication IDthe username
Passwordthe password
Registrationon
CodecsG.711 A-law, then u-law
DTMFRFC 2833 / RFC 4733

Then three things on the PBX, whatever the make:

  1. Calls to the agent: an outbound route, short code, IVR option or overflow that uses the Voice Logica trunk.
  2. Transfers back: calls arriving on the trunk reach extensions by number (DID/DDI routing).
  3. In Voice Logica: add the extensions as transfer destinations (External with the extension number, or a User with that extension) and use Warm transfer.

A system that cannot register a trunk but takes SIP extensions connects through an edge device. A system with no SIP: Analog and ISDN systems.

MiVoice Office 250: System → Device and Feature Codes → SIP Peer → SIP Trunk Groups → right-click Create SIP Trunk Group. In its configuration: Registration → Enable Registration = Yes, Authentication username and password, address and port, Operating State = In-Service. System → IP-Related Information → Call Configurations: DTMF Encoding RFC2833, G.711 A-law, 20 ms. Back to extensions: Call Routing Tables (DID patterns) as the trunk group’s Ring-In Type. Needs SIP trunk licences.

MiVoice Office 400 (Mitel / Aastra 400): WebAdmin Configuration Assistant → Incoming call routing → Add under Network interfaces → SIP provider (registrar = the server, port 5060), then a SIP account: SIP ID and User name = the username, Password, Registration required ticked. Back to extensions: the DDI plan. Needs one SIP Access Channels licence per call.

MiVoice Business: SIP Peer Profile (UDP, the server, port 5060) with SIP Authentication, a SIP trunk group, ARS to send calls to it and DID routing back.

Can my SIP PBX connect to Voice Logica if its make is not listed?

Yes, if it can register a SIP trunk to a provider: pick Other SIP PBX in Telephony - Trunks - Connect your PBX and enter the server, username and password on the PBX, with port 5060 UDP, registration on, G.711 A-law then u-law, and DTMF RFC 2833 / RFC 4733. A system that cannot register a trunk but takes SIP extensions connects through an edge device. A system with no SIP connects as described in Analog and ISDN systems.

How do I connect my Mitel phone system to Voice Logica?

A Mitel registers a SIP trunk to Voice Logica; create the connection with Telephony - Trunks - Connect your PBX and pick Other SIP PBX. On MiVoice Office 250, create a SIP trunk group with Enable Registration = Yes (it needs SIP trunk licences); on MiVoice Office 400, add a SIP provider and a SIP account with Registration required (one SIP Access Channels licence per call); on MiVoice Business, use a SIP Peer Profile with SIP Authentication. Transfers back to extensions go through DID routing (on the 400, the DDI plan).

Does Voice Logica work with a Samsung OfficeServ phone system?

Yes. OfficeServ 7030 / 7100 / 7200 / 7400 register a SIP trunk to Voice Logica, although these models are discontinued and support ended in 2021. They need SIP trunk and MGI channel licences. Create the SIP trunk group in MMC 603, enter the server, username and password in MMC 837 SIP Carrier Options, and map transfers back to extensions in the MMC 714 DDI table.

How do I connect a Cisco CUBE or CME to Voice Logica?

CUBE, CME and UC500 register to Voice Logica on the IOS gateway under sip-ua, with the username, the password and the server as registrar; check with show sip-ua register status. A dial-peer pointing at the server sends calls to the agent, and dial-peers for the extension numbers take the transfers back. CUCM reaches Voice Logica through a CUBE in front of it.

Can I connect Microsoft Teams to Voice Logica?

Not directly yet. Teams does not register trunks; it needs Direct Routing through a Microsoft-certified SBC and Teams Phone licences, and Teams Direct Routing to Voice Logica is coming. Until then, forward the number to Voice Logica or keep a PBX in front of Teams.