For AI assistants: this page as plain markdown is at https://docs.voicelogica.ai/raw/phone-systems/alcatel-lucent.md, and https://docs.voicelogica.ai/llms.txt lists the docs by topic, one file each, small enough to read whole. Read those rather than this HTML page.
Alcatel-Lucent OXO
Esta página aún no está disponible en tu idioma.
How Voice Logica connects
Section titled “How Voice Logica connects”The OXO registers a SIP trunk to Voice Logica (way 1) as a public SIP gateway in OMC. Voice Logica creates the trunk and gives you a server, a username and a password.
- Calls the OXO routes to this gateway (ARS prefix) are answered by the AI agent.
- The agent transfers callers back over the same trunk; the OXO rings the extension through its public numbering plan (DDI).
Without an IP trunks licence, the OXO can instead take Voice Logica as a SIP extension through an edge device (way 2). The OXO’s SIP extensions listen on port 5059.
Before you start
Section titled “Before you start”- An IP trunks licence: OMC → Hardware and Limits → Software Key Features.
- Enough VoIP-trunk channels: Voice Over IP → VoIP: Parameters. A Warm transfer uses two until it connects.
1. Create the connection in Voice Logica
Section titled “1. Create the connection in Voice Logica”Telephony - Trunks - Connect your PBX, pick Alcatel-Lucent OXO and the agent. Keep the dialog open until it says Connected.
2. Configure the OXO in OMC
Section titled “2. Configure the OXO in OMC”- External Lines → List of Accesses: make the VoIP trunk channels public trunks; add them to a trunk group in External Lines → List of Trunk Groups.
- Numbering → Automatic Routing Selection → Index of Gateway Parameters: Target Domain Name = the server, Default Transport Mode UDP, Registration = Requested, Registrar Name = the server, Port 5060, Expiration Time 3600, DTMF = Out-of-Band (RFC 4733).
- SIP Accounts: Login and Registered User Name = the username, Password = the password.
- Voice Over IP → VoIP: Parameters → Codecs: G.711 A-law first.
3. Send calls to the agent
Section titled “3. Send calls to the agent”Numbering → Automatic Routing Selection: a prefix whose destination is this gateway and trunk group. Point an attendant group overflow, a DDI or an after-hours destination at that prefix.
4. Let the agent transfer back to extensions
Section titled “4. Let the agent transfer back to extensions”Map incoming numbers from the trunk to extensions in the public numbering plan (DDI). Then, in Voice Logica, add the extensions as transfer destinations: an External destination with the extension number, or a User with that extension. Use Warm transfer.
5. Check it works
Section titled “5. Check it works”- The dialog says Connected; the trunk’s SIP logs in Voice Logica show each REGISTER and our reply.
- Dial the ARS prefix from an extension: the call appears in Calls.
Good to know
Section titled “Good to know”- Static NAT on the OXO needs release R10 or later; on older releases use an edge device.
- These steps follow a carrier’s OXO guide; menu names can differ by release. Your Alcatel business partner can confirm them.
Frequently asked questions
Section titled “Frequently asked questions”How do I connect my Alcatel-Lucent OXO to Voice Logica?
The OXO registers a SIP trunk to Voice Logica as a public SIP gateway in OMC. In Voice Logica, open Telephony - Trunks - Connect your PBX and pick Alcatel-Lucent OXO and the agent to get a server, a username and a password. In OMC, enter the server under Numbering → Automatic Routing Selection → Index of Gateway Parameters with Registration = Requested and port 5060, and the username and password under SIP Accounts. The Voice Logica dialog says Connected when the OXO registers.
What licence does my Alcatel-Lucent OXO need to connect to Voice Logica?
The OXO needs an IP trunks licence (OMC → Hardware and Limits → Software Key Features) and enough VoIP-trunk channels (Voice Over IP → VoIP: Parameters). Each call with the agent uses one channel, and a Warm transfer uses two until it connects.
Can I connect an Alcatel-Lucent OXO to Voice Logica without an IP trunks licence?
Yes. Without an IP trunks licence, the OXO can take Voice Logica as a SIP extension through an edge device in the office. The OXO’s SIP extensions listen on port 5059.
How do I send calls from my Alcatel-Lucent OXO to the AI agent?
In OMC, under Numbering → Automatic Routing Selection, create a prefix whose destination is the Voice Logica gateway and trunk group. Then point an attendant group overflow, a DDI or an after-hours destination at that prefix; dialling the prefix from an extension also reaches the agent.
Can the AI agent transfer callers back to Alcatel-Lucent OXO extensions?
Yes. The agent transfers callers back over the same trunk, and the OXO rings the extension through its public numbering plan (DDI), where you map incoming numbers from the trunk to extensions. In Voice Logica, add the extensions as transfer destinations (an External destination with the extension number, or a User with that extension) and use Warm transfer.
