For AI assistants: this page as plain markdown is at https://docs.voicelogica.ai/raw/phone-systems/other.md, and https://docs.voicelogica.ai/llms.txt lists the docs by topic, one file each, small enough to read whole. Read those rather than this HTML page.
Other makes
Esta página aún no está disponible en tu idioma.
How Voice Logica connects
Section titled “How Voice Logica connects”Any phone system that can register a SIP trunk to a provider connects the same way (way 1): create the connection with Telephony - Trunks - Connect your PBX (pick Other SIP PBX), and enter on the PBX:
| On the PBX | Value |
|---|---|
| Server / registrar / proxy / domain | the server from the dialog |
| Port, transport | 5060, UDP |
| Username and authentication ID | the username |
| Password | the password |
| Registration | on |
| Codecs | G.711 A-law, then u-law |
| DTMF | RFC 2833 / RFC 4733 |
Then three things on the PBX, whatever the make:
- Calls to the agent: an outbound route, short code, IVR option or overflow that uses the Voice Logica trunk.
- Transfers back: calls arriving on the trunk reach extensions by number (DID/DDI routing).
- In Voice Logica: add the extensions as transfer destinations (External with the extension number, or a User with that extension) and use Warm transfer.
A system that cannot register a trunk but takes SIP extensions connects through an edge device. A system with no SIP: Analog and ISDN systems.
Where the trunk lives, per make
Section titled “Where the trunk lives, per make”MiVoice Office 250: System → Device and Feature Codes → SIP Peer → SIP Trunk Groups → right-click Create SIP Trunk Group. In its configuration: Registration → Enable Registration = Yes, Authentication username and password, address and port, Operating State = In-Service. System → IP-Related Information → Call Configurations: DTMF Encoding RFC2833, G.711 A-law, 20 ms. Back to extensions: Call Routing Tables (DID patterns) as the trunk group’s Ring-In Type. Needs SIP trunk licences.
MiVoice Office 400 (Mitel / Aastra 400): WebAdmin Configuration Assistant → Incoming call routing → Add under Network interfaces → SIP provider (registrar = the server, port 5060), then a SIP account: SIP ID and User name = the username, Password, Registration required ticked. Back to extensions: the DDI plan. Needs one SIP Access Channels licence per call.
MiVoice Business: SIP Peer Profile (UDP, the server, port 5060) with SIP Authentication, a SIP trunk group, ARS to send calls to it and DID routing back.
OfficeServ 7030 / 7100 / 7200 / 7400 (discontinued, support ended 2021). Needs SIP trunk and MGI channel licences.
- MMC 603 / DM 4.1.2: create the SIP trunk group.
- MMC 837 / DM 5.2.13 SIP Carrier Options: Registrar Address and Outbound Proxy = the server, Username and Auth Username = the username, Auth Password = the password, Alive Notify = OPTION (30 s).
- Back to extensions: MMC 714 / DM 3.2.3 DDI table.
CUBE, CME, UC500 register on the IOS gateway:
sip-ua credentials username <username> password 0 <password> realm <server> authentication username <username> password 0 <password> registrar dns:<server> expires 3600Check with show sip-ua register status. Send calls with a dial-peer pointing at the server; dial-peers for the extension numbers take the transfers back. CUCM reaches Voice Logica through a CUBE in front.
WMS → Trunks → SIP → +: Auth Login and From user = the username, Password, From domain and Address or Host Name = the server, Enable registration on. Advanced: G.711 A-law, 20 ms. Dialplan = the procedure that handles incoming calls (usually main), so transfers back reach extensions.
Zycoo CooVox: Basic → Trunks → New VoIP Trunk, leave Without Authentication unticked, username and password. Calls to the agent: Basic → Outbound Routes. Transfers back: Inbound Control → Inbound Routes.
Xorcom CompletePBX: PBX → External → Trunks (SIP, username, host = the server, port 5060, secret, register string). Transfers back: PBX → External → Inbound Routes.
Teams does not register trunks — it uses Direct Routing. Voice Logica supports this directly: it acts as the certified SBC, so you do not need your own. Add a Microsoft Teams trunk (Telephony - Trunks - Add Trunk - Microsoft Teams), then in your Microsoft 365 tenant pair the trunk’s FQDN as a Direct Routing gateway and add a voice route to it. You still need Teams Phone licences. Full checklist: Your own carrier - Microsoft Teams.
Frequently asked questions
Section titled “Frequently asked questions”Can my SIP PBX connect to Voice Logica if its make is not listed?
Yes, if it can register a SIP trunk to a provider: pick Other SIP PBX in Telephony - Trunks - Connect your PBX and enter the server, username and password on the PBX, with port 5060 UDP, registration on, G.711 A-law then u-law, and DTMF RFC 2833 / RFC 4733. A system that cannot register a trunk but takes SIP extensions connects through an edge device. A system with no SIP connects as described in Analog and ISDN systems.
How do I connect my Mitel phone system to Voice Logica?
A Mitel registers a SIP trunk to Voice Logica; create the connection with Telephony - Trunks - Connect your PBX and pick Other SIP PBX. On MiVoice Office 250, create a SIP trunk group with Enable Registration = Yes (it needs SIP trunk licences); on MiVoice Office 400, add a SIP provider and a SIP account with Registration required (one SIP Access Channels licence per call); on MiVoice Business, use a SIP Peer Profile with SIP Authentication. Transfers back to extensions go through DID routing (on the 400, the DDI plan).
Does Voice Logica work with a Samsung OfficeServ phone system?
Yes. OfficeServ 7030 / 7100 / 7200 / 7400 register a SIP trunk to Voice Logica, although these models are discontinued and support ended in 2021. They need SIP trunk and MGI channel licences. Create the SIP trunk group in MMC 603, enter the server, username and password in MMC 837 SIP Carrier Options, and map transfers back to extensions in the MMC 714 DDI table.
How do I connect a Cisco CUBE or CME to Voice Logica?
CUBE, CME and UC500 register to Voice Logica on the IOS gateway under sip-ua, with the username, the password and the server as registrar; check with show sip-ua register status. A dial-peer pointing at the server sends calls to the agent, and dial-peers for the extension numbers take the transfers back. CUCM reaches Voice Logica through a CUBE in front of it.
Can I connect Microsoft Teams to Voice Logica?
Not directly yet. Teams does not register trunks; it needs Direct Routing through a Microsoft-certified SBC and Teams Phone licences, and Teams Direct Routing to Voice Logica is coming. Until then, forward the number to Voice Logica or keep a PBX in front of Teams.
